FBFreight Base System
Guides › Buyer's Guide

Eight Mistakes Companies Make When Buying GPS Fleet Tracking for a Mixed Fleet

Vans, heavy trucks, unpowered trailers and plant equipment have different power, data and legal needs. Here are eight buying mistakes that inflate mixed-fleet tracking costs, and the fix for each.

Freight Base System editorial team · November 2026 · 7 min read

Mistake one: specifying a single device for every asset

The most expensive error in GPS fleet tracking for business happens before anyone sees a demo. The fleet manager sends out one request for quote, "tracker for 180 assets," and vendors price one hardwired vehicle unit across the whole list. In a mixed fleet that fails twice. You overpay for capability on assets that don't need it, and you get the wrong behavior on assets that do.

An unpowered trailer has no ignition signal and no engine data. A van with no accessible engine data gains little from a CAN-bus-capable unit. A compact excavator needs engine hours and geofencing, not harsh-cornering alerts. And a tracker that pings every 30 seconds will drain a battery unit in weeks.

Advertisement

What to do instead: sort your assets by power source and by the decision each one supports, then specify hardware for each group. Most mixed fleets end up with three or four device classes, ideally on one platform.

Asset classTypical deviceReporting intervalHardware (USD)Monthly per asset (USD)
Light vans and carsOBD or hardwired vehicle unitEvery 30–120 seconds while moving20–15015–35
Heavy trucksHardwired unit with CAN/J1939 or FMS access, optional cameraEvery 15–60 seconds, plus engine events100–300 (cameras 200–600 extra)25–60
Unpowered trailers and containersSolar or long-life battery trailer tracker1–4 times a day, more often on motion60–2504–15
Plant and yellow equipmentHours-and-location unit, or OEM telematics feedHourly to daily, plus ignition events50–2005–20

These are typical 2026 market ranges. They vary by contract length, volume and country, so confirm current pricing with each vendor before you budget.

Mistakes two and three: ignoring network sunsets and single-carrier lock-in

Plenty of trackers still on sale, and a lot of cheap used stock, depend on 2G or 3G. Sunset timing differs by country. Many markets, including the US and parts of Europe, have already shut down 3G. Some European, African, Latin American and Southeast Asian networks still run 2G but have announced or are planning retirement. A device that works in your home market can stop reporting midway through a five-year contract, either when a trailer crosses a border or when one carrier switches off a band.

The related mistake is buying devices locked to one carrier. Trailers park in rural yards, cross borders and sit inside steel-clad warehouses. One network's coverage gaps become blind spots on your map.

What to do instead:

  • Require LTE-M, NB-IoT or LTE Cat 1 bis radios with a documented fallback, and get the vendor's planned hardware support end date in writing.
  • Ask for multi-network or eSIM connectivity that roams across the countries you actually operate in, with a list of supported operators for each.
  • Ask who pays to replace hardware if a network shuts down mid-contract. The answer should be the vendor, or at least a fixed, capped swap price.
  • For battery trailer units, confirm that NB-IoT is deployed in your lanes. Coverage is uneven between countries.

Mistake four: treating the telematics data plan as a line item nobody reads

Buyers haggle over hardware discounts and then accept whatever data plan comes bundled. Over a 36- to 60-month term, connectivity and software usually cost several times as much as the hardware. That's where the money goes.

Four cost drivers matter. Reporting frequency: faster pings use more data and, on battery devices, shorten battery life. Roaming: cross-border trailers on a domestic-only plan can trigger surcharges or simply go dark. Video: event-triggered dashcam clips are fine, but continuous upload costs far more. Pooling: with pooled data, busy trucks draw on the allowance of idle trailers.

Hypothetical worked example: say a regional distributor runs 40 vans, 25 tractors, 60 trailers and 15 pieces of yard equipment. Put all 140 assets on a $30 vehicle plan and the bill is $4,200 a month. Split by class instead, with vans at $22, tractors at $40, trailers at $8 and equipment at $10, and it's roughly $2,500 a month. That's about $20,000 a year saved, and the trailers and equipment still report at the frequency their decisions need.

What to do instead: ask for pricing per device class, roaming terms by country, overage rates, and what happens to the subscription of a suspended asset, such as a trailer laid up for winter. Negotiate seasonal suspension up front.

Mistake five: one driver privacy policy for every country

Driver privacy is where multinational rollouts most often stall. Head office writes one policy and rolls it out everywhere, and it fails because the rules differ, sometimes sharply.

  • EU and UK: GDPR and UK GDPR generally require a lawful basis, proportionality and a data protection impact assessment for systematic monitoring. Tracking outside working hours is hard to justify. In Germany, the Netherlands and some other countries, works councils may have co-determination rights before you switch anything on.
  • India: the Digital Personal Data Protection Act sets notice and purpose-limitation duties, phased in as its rules take effect.
  • Brazil, South Africa, Saudi Arabia, UAE: LGPD, POPIA and the Gulf states' personal data protection laws each have their own consent, retention and cross-border transfer rules.
  • United States: there's no single federal rule. Some states have their own employee-monitoring notice or location-tracking requirements.

Driver-facing cameras raise the bar in almost every jurisdiction.

What to do instead: make configurable privacy controls a hard requirement: private-use modes, role-based access, retention periods set per country, and the ability to blur or disable driver-facing video by region. Ask where the data is hosted. These laws change, so have employment and data-protection counsel in each country review your policy before go-live.

Mistakes six and seven: missing OEM and compliance data, and buying a dashboard instead of an integration

Heavy trucks and plant equipment often report on their own. Many construction OEMs publish data through the ISO 15143-3 (AEMP 2.0) standard, and many truck makers offer FMS-standard access. Fitting an aftermarket box to a machine that already reports fuel burn, fault codes and engine hours duplicates cost and can give you less data. Compliance needs vary by region too. EU and UK operators work with tachograph downloads. US and Canadian carriers need registered ELDs. Other markets have their own hours-of-service or speed-limiter rules.

The second mistake is judging vendors by how good the map looks. Tracking data pays for itself only when it reaches the systems where decisions are made: your TMS for proof of delivery and ETAs, your ERP for asset utilization and billing, and your maintenance system for hour-based service intervals.

What to do instead: list every OEM portal you already pay for and ask each vendor whether it can ingest that data through APIs. Confirm that compliance modules are certified for your specific jurisdictions. Ask for documented REST APIs, webhook support and rate limits, and look for existing connectors to your ERP and TMS. Platforms such as Geotab, Samsara, Webfleet and Verizon Connect differ in regional availability, and their partner integrations vary by region. Test with your own systems, not a sandbox.

Mistake eight: signing a long contract without a structured pilot

Five-year terms with auto-renewal, hardware you don't own, early-termination fees equal to the remaining subscription, and installation billed per visit can wipe out any price advantage. Walk away if the vendor won't do a paid pilot, can't name certified installers in your countries, or won't put hardware replacement terms in writing.

What to do instead: run a 60- to 90-day pilot covering every asset class in at least two of your operating countries. Agree the success criteria beforehand: trailer location accuracy at the yard, battery life against the vendor's claim, hours of manual logging removed on equipment, and how reliably data reaches your TMS. Then negotiate:

  1. A 36-month term with a capped renewal increase.
  2. Hardware ownership, or a guaranteed swap on network sunset.
  3. Seasonal suspension for idle assets.
  4. Data export in a usable format if you leave.

Decision rule: if one vendor can't support all four asset classes in every country where you operate, accept a second specialist for trailers or equipment rather than forcing a bad fit. Before your first demo, build the asset-class table above using your real asset counts.

Quick answers

Can one platform track vans, trucks, trailers and equipment together?

Usually, yes. Most major telematics platforms support several device classes, and many can take in OEM equipment data through partner integrations. Where they tend to fall short is long-life trailer hardware and coverage in particular countries. Test both in a pilot before committing the whole fleet.

How long do solar or battery trailer asset trackers really last?

It depends heavily on reporting frequency, network type and temperature. Vendor claims usually assume one or two reports a day in good coverage. Solar units can run for years but may struggle on trailers parked indoors or through long northern winters. Ask for battery-life data at your planned reporting interval and verify it during the pilot.

Do we need driver consent to use GPS fleet tracking for business?

It depends on the country, and sometimes on the state or province. Some regimes rely on legitimate interest plus clear notice. Others expect works council consultation or specific employee notices, and driver-facing cameras face stricter rules almost everywhere. Get advice from local employment and data-protection counsel before deployment.

Written by the Freight Base System editorial team. Prices, features and rules change often - confirm details with the vendor or a licensed professional before you decide.